4
Transport and storage
4.1
Transport protection
Removing the transport safety device on the SR-unit
1
Open the lock and swivel the flange fixture open.
2
Check the transport safety device for damage.
3
Remove the transport safety devices (see Figure).
4
Store the transport safety device.
Figure 7: Transport safety device on the SR-unit
1
Remove the front cover of the sender/receiver unit
3
1
2
Figure 8: Transport safety device on the GMP measuring probe
1
2 plastic protective caps to cover the optics
2
Remove the protective stickers
3
Set the locking device to the "close" position
4
TRANSPORT AND STORAGE
24
O P E R A T I N G I N S T R U C T I O N S | GM700 Ex
8019532/100Q/V1-1/2018-08 | SICK
Subject to change without notice