Commissioning and Operation
FLOWSIC60 · Operating Instructions · 8014241/YTG9/V1-0/2016-02 · © SICK Engineering GmbH
49
Su
bj
ec
t t
o c
han
ge
w
ith
ou
t n
ot
ic
e
4.2.2
Data editing in Configuration Mode
In configuration parameters which are relevant to the commissioning or operation of the
meter can be modified.
Navigate to the parameter and use the ENTER function to begin editing.
Options depending on the type of data:
Integer: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, sign
Floating point: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, space, decimal point, sign
List of registers:List of all registers (which are plausible for this parameter)
Example: Switching the meter to Configuration Mode and editing the path length.
Action
Buttons
Display
Standard display
-
VOG 0 m/s
Aout 12.0 mA
Enter menu
ENTER
Operation Mode
Operation
Edit parameter "Operation Mode"
ENTER
Configuration?
OK
Cancel
Confirm change to "Maintenance
Mode"
ENTER –> Change mode
Configuration?
Success!
Scroll through the menu structure to
the parameter you want to edit
(ENTER, STEP, DATA)
In this example, the impulse factor is
edited
Path length
6.5 m
Select the parameter
ENTER
Path length
6.5
Move cursor to the digit that you want
to change
1 * STEP
Path length
6
.
Put in edit mode
2 * DATA
Path length
6.5
Enter desired value
x * DATA
Path length
6.2
Confirm new value
ENTER
Path length
6.2 m
Return to standard display
3 x CE/C
VOG 0 m/s
Aout 12.0 mA
