SICK FLOWSIC60, Operating Instructions Manual, Page: 25 / 71

Installation
FLOWSIC60 · Operating Instructions · 8014241/YTG9/V1-0/2016-02 · © SICK Engineering GmbH 25
Su
bj
ec
t t
o c
han
ge
w
ith
ou
t n
ot
ic
e
3.1.2
Mounting of sensors to tunnel wall
The sensors should be positioned at the same height on opposite tunnel walls.

Mark holes for sensors on the same horizontal axis on each side of tunnel wall

Drill holes for screws for mounting bracket at 70 mm

Insert anchor (heavy duty anchors included in delivery)

Fasten sensors with hexagon screws or nuts

Sensors are marked 'A' and 'B', and must be mounted relative to air flow direction as
shown in
Fig. 7

The sensors can be adjusted slightly in order to align them with one another as shown
in

p. 23, Fig. 7
Fig. 9
Depth
D
Drill hole Tunnel wall/roof
Heavy duty anchor
l
Mounting bracket
Mounting set Dia. Depth Notes
2M8-1.4571 12

60 The anchor should be flush with the
tunnel wall/roof