SICK Flexi Soft, Operating Instructions Manual, Page: 174 / 200

Chapter 7 Operating Instructions
Flexi Soft Gateways
174
© SICK AG • Industrial Safety Systems • Germany • All rights reserved 8012664/XB29/2013-06-11
Subject to change without notice
Layout and content of the
process image
7.2 Default settings for the operational data
In the delivery status, the operational data are pre-configured. Depending on the gateway
used, these data are subdivided in several data blocks.
The following table gives an overview which bytes are assigned to the default configuration
and how the data are modularised for the different gateways.
EtherNet/IP, Modbus TCP,
Ethernet TCP/IP PROFINET IO, PROFIBUS DP
Byte Default assignment Input data set Default assignment Input data block
0 Logic result 0 Module 1 input
1 Logic result 1 Module 2 input
2 Logic result 2 Module 3 input
3 Logic result 3 Module 4 input
4 Module 1 input Module 5 input
5 Module 2 input Module 6 input
6 Module 3 input Module 7 input
7 Module 4 input Module 8 input
8 Module 5 input Module 9 input
9 Module 6 input Module 10 input
10 Module 7 input Module 11 input
11 Module 8 input Module 12 input
#1
(12 bytes)
12 Module 9 input Module 1 output
13 Module 10 input Module 2 output
14 Module 11 input Module 3 output
15 Module 12 input Module 4 output
16 Module 1 output Module 5 output
17 Module 2 output Module 6 output
18 Module 3 output Module 7 output
19 Module 4 output Module 8 output
20 Module 5 output Module 9 output
21 Module 6 output Module 10 output
22 Module 7 output Module 11 output
23 Module 8 output Module 12 output
#2
(12 bytes)
24 Module 9 output Logic result 0
25 Module 10 output Logic result 1
26 Module 11 output Logic result 2
27 Module 12 output Logic result 3
28 Gateway direct output
values 0
Gateway direct output
values 0
29 Gateway direct output
values 1
Gateway direct output
values 1
30 Gateway direct output
values 2
Gateway direct output
values 2
31 Gateway direct output
values 3
Gateway direct output
values 3
32-35 Not assigned Not assigned
#3
(12 bytes)
36-47 Not assigned Not assigned #4
(12 bytes)
48-49 Not assigned
#1
(50 bytes)
Not assigned #5
(2 bytes)
For the FX0-GETC please see Tab. 75 on page 107.
For the FX0-GCAN please see Tab. 110 on page 143.
The default byte assignment can be freely customized as described in the following
section.
Tab. 149: Default configura-
tion for the operational data
transmitted into the network