SICK Flexi IO XTDO1 Operating Instructions Manual Download Page 17 | Manualshive

Page: 17 / 44

SICK Flexi IO XTDO1 Operating Instructions Manual Download Page 17

5

Mounting

5.1

Safety

WARNING

Electrical voltage
There is a risk of injury from electrocution while connecting the devices.

b

Disconnect the power for the entire plant/machine.

WARNING

Unintended start of the plant/machine
The plant/machine could inadvertently start while you are connecting the devices.

b

Disconnect the power for the entire plant/machine.

NOTICE

Enclosure rating IP20 only applies if the front connector is mounted.

5.2

Mounting procedure

For information on the mounting process, please see the operating instructions:

•

“Flexi Compact” (SICK part number 8024573)

5.3

Module exchange

Approach

1.

Disconnect module and the connected components from all voltage sources.

2.

Take front connector with connected cables off the defective device: Press the
unlocking mechanism of the front connector downwards and pull out the front
connector.

Figure 6: Dismantle front connector

3.

Dismantle the defective module.

MOUNTING

5

8024583/2020-11-10 | SICK

O P E R A T I N G I N S T R U C T I O N S | Flexi IO XTDO1

17

Subject to change without notice

«
...
15
16
17
18
19
...
»

Summary of Contents for Flexi IO XTDO1













































Reviews:

No comments