manualshive.com logo in svg

SICK EtherNet/IP AFM60, Operating Instructions Manual, Page: 19 / 113

Share
Download
SICK EtherNet/IP AFM60 Operating Instructions Manual Download Page 19

23h Position Sensor

1h Identity

04h Assembly

06h Connection Manager

F4h

F5h

Network

F6h

02h

Massage

Router

48h QoS

47h DLR

Figure 9: Supported classes

Table 8: Supported classes

Class code

Class

Description

Access

Instances

01h

Identity object

Contains all device-specific data
(e.g., ID, device type, device status,
etc.).

Get

1

02h

Message router
object

Contains all supported class codes
of the encoder and the max. number
of connections.

Get

1

04h

Assembly object

Combines the data of multiple
objects into a single object. Sup‐
plies e.g. the position value of the
encoder.

Get

7

06h

Connection man‐
ager object

Contains connection-specific attrib‐
utes for triggering, transport, connec‐
tion type, etc.

Get

1

23h

Position sensor
object

Contains all attributes for program‐
ming the encoder parameters such
as scaling.

Set/Get 1

F4h

Port object

Contains the available ports, port
name and node address.

Get

1

F5h

TCP/IP interface
object

Contains the attributes for TCP/IP,
such as IP address, subnet mask,
and gateway or reference for the
IP address via DHCP or hardware
switch.

Set/Get 1

F6h

Ethernet link
object

Contains connection-specific attrib‐
utes, such as transmission speed,
interface status, and MAC address.

Get

3

47h

Device level ring
(DLR) object

Contains status and configuration
attributes of the DLR protocol.

Get

1

PRODUCT DESCRIPTION 

3

8014213/1EF3/2021-12-08 | SICK

O P E R A T I N G   I N S T R U C T I O N S | AFS/AFM60 EtherNet/IP

19

Subject to change without notice

Summary of Contents for EtherNet/IP AFM60


















































































































Reviews:

No comments