65
8012426/YWL2/3-0/2016-08| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100
Subject to change without notice
START-UP AND PARAMETER SETTINGS
4
4.3.4
Setting the analog outputs parameters
Select the “Configuration / IO Configuration / Output Parameters” directory to set the
analog outputs.
Fig. 39: SOPAS ET menu: MCU/Configuration/IO configuration/Output Parameters
●
Default values
see “Factory settings”, page 63
●
In order to output the dust concentration under standard conditions (“Conc. s.c.”
(Ext)), set the parameters for the analog outputs according to
log inputs parameters”, page 67
.
