91
8020216/19YN/V3-0/2020-12| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100 Ex-3K
Subject to change without notice
MENUS
11
11
Menus
11.1
MCU and MCUDH Ex-3K control units menu tree
The menu structure of the control units is divided into configuration functions (menu tree
“Menu”) and diagnostic functions (menu tree “Diagnostics”). The respective functions can
be selected directly via the buttons (depending on the version of the control unit,
“MCUDH Ex-3K displays and operating elements”, page 88
plays and operating elements”, page 90
).
11.1.1
Menu tree “Menu”
Menu level Designation
Explanation
1
I/O (MCU)
Control unit settings
1.1
Operating mode
Setting the maintenance mode or operating mode of the
control unit
1.1.1
Set Maintenance / Set Operation
1.2
Adjustment
Start check cycle
1.2.1
Start check cycle
1.3
I/O Diagnosis
AO / AI / Device info
1.3.1
Analog output
Display current signal values n
1.3.2
Analog input
Display current signal values
1.3.3
Device Info
Control unit information text
1.4 I/O
Parameter
Analog interfaces, set to sensor type
(Requires maintenance mode condition)
1.4.1
AO Parameter
Selection of analog output
The parameterization of the analog interfaces is identical, therefore the sub-
menu for analog input and analog output is only listed once each.
The identical number of the submenu and interface is marked with “x”.
1.4.1.x
AO x
End values, Live Zero, measured value source
1.4.1.x.1
Limit low
Set limit low in mg/m³ (password required)
1.4.1.x.2
Limit high
Set limit high in mg/m³ (password required)
1.4.1.x.3
Live Zero
Set zero point for 0/2/4 mA signal strength
1.4.1.x.4
Measured value
Assign a measured value source to interface AO x :
ConcA_SL
Dust concentration in operating condition
ConcN
Dust concentration in standard condition
SL
Scattered light intensity
1.4.2
AI Parameter
Analog input selection
1.4.2.x
AI x
Assign end values (temperature and pressure)
1.4.2.x.1
Limit low
Set limit low in °C / hPa (password required)
1.4.2.x.2
Limit high
Set limit high in °C / hPa (password required)
