69
8020216/19YN/V3-0/2020-12| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100 Ex-3K
Subject to change without notice
CONFIGURING
9
9.2.3
Changing the password for SOPAS ET menus
To change the password for a user level, the operator must be logged in to SOPAS ET at the
appropriate level. To do this, start SOPAS ET and add a connected device to the project.
Open the device window by double-clicking on the connected device and log in to the user
level for which the password is to be changed. In the command bar, a menu is named after
the connected device, click on the “Change password” setting in this pull-down menu.
9.3
Connecting to the MCUDH Ex-3K control unit
9.3.1
Connection via RS485 Service interface
Recommended procedure:
1
Establish electrical connections (
see “Communication options”, page 62
Option 1).
2
Switch control unit on.
3
Start SOPAS ET.
4
Select “Search settings”.
5
“Device family oriented search”
6
Click on the MCU (DH) control unit.
7
Make the settings:
– Ethernet communication (always clicked)
– USB communication (always clicked)
– Serial communication: Click
8
Do not specify IP addresses.
9
A list of COM ports appears.
Specify the COM port of the DUSTHUNTER.
If you do not know the COM port:
see “Finding the DUSTHUNTER COM port”, page 86
10
Enter a name for this search if you want to save it.
11
Click “Finish”.
