SICK DUSTHUNTER SP100 Ex-2K, Operating Instructions Manual, Page: 82 / 130

82 8024493/AE00/V1-0/2020-09| SICK O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100 Ex-2K
Subject to change without notice
10
OPERATION
10 Operation
10.1 Operating concept
The control unit of the measuring system has a display with LCD display, capacitive buttons
for operation and status LEDs. Alternatively, the control unit can be connected to an
external device and operated via the SOPAS ET software (
see “SOPAS ET”, page 65 ).
●
Many menus and functions can also be used via the display.
●
The menus and functions are called up using the buttons.
●
Status LEDs on the display indicate the current operating status.
10.2 User groups
Certain device functions are first accessible after a password has been entered.
Table 20: User groups on the control unit
10.2.1 Changing the password for user groups
The password for the user groups on the control unit can be changed in the display settings
in SOPAS ET (
see “Changing display settings”, page 79 ).
NOTE:
The display can also be operated in the Ex-area.
User group Access to
0 Operator Displays measured values and system states
No password required.
1 Authorized operator Displays, inquiries as well as parameters required for commissioning
or adjustment to customer-specific demands and diagnosis (preset
password: 1234).