74
8024493/AE00/V1-0/2020-09| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100 Ex-2K
Subject to change without notice
9
CONFIGURING
9.4.5
Setting the analog outputs parameters
Select the “Configuration / IO Configuration / Output Parameters” directory to set the
analog outputs.
Fig. 37: SOPAS ET menu: MCU/Configuration/IO configuration/Output Parameters
●
Standard values
see “Factory settings”, page 72
●
In order to output the dust concentration under standard conditions (“Conc. s.c.”
(Ext)), set the parameters for the analog outputs according to
.