SICK DUSTHUNTER SP100 Ex-2K, Operating Instructions Manual, Page: 73 / 130

73 8024493/AE00/V1-0/2020-09| SICK O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100 Ex-2K
Subject to change without notice
CONFIGURING
9
9.4.4 Determining the function check
Interval time, control value output on the analog output and the starting timepoint for
automatic function check can be modified in the “Adjustment / Function Check -
Automatic” directory.
Fig. 36: SOPAS ET menu: MCU/Adjustment/Function Check - Automatic (example)
Table 14: Function check setting options
Standard values: see “Factory settings”, page 72
Entry field Parameter Remark
Output duration of
function control value
Value in seconds Output duration of control values.
Function check interval Time between two
check cycles
see “Function check”, page 30
Function Check
Start Time
Hour Defining a start timepoint in hours and minutes.
Minute
The value measured last is output during control value determination ( see “Function
check”, page 30 ).