66
8024493/AE00/V1-0/2020-09| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100 Ex-2K
Subject to change without notice
9
CONFIGURING
9.2.3
Changing the password for SOPAS ET menus
To change the password for a user level, the operator must be logged in to SOPAS ET at the
appropriate level. To do this, start SOPAS ET and add a connected device to the project.
Open the device window by double-clicking on the connected device and log in to the user
level for which the password is to be changed. In the command bar, a menu is named after
the connected device, click on the “Change password” setting in this pull-down menu.
9.3
Connecting to MCUDH Ex-3K control unit
9.3.1
Connect to the MCUDH Ex-3K control unit via the Service interface
Recommended procedure:
1
Connect the RS485 line to the MCUDH Ex-3K control unit Service interface (
“Interface module (option) of the MCUDH Ex-3K”, page 59
).
2
Connect the RS485-USB converter to the RS485 line, e.g. the adapter cable “SOPAS
Service Kit” which is available in the MCUDH Ex-3K accessories (
MCUDH Ex-3K control unit”, page 127
3
Connect the USB connection with the computer.
4
Switch control unit on.
5
Start SOPAS ET.
6
Select “Search settings”.
7
“Device family oriented search”
8
Click on the MCU (DH) control unit.
9
Make the settings:
– Ethernet communication (always clicked)
– USB communication (always clicked)
– Serial communication: Click
10
Do not specify IP addresses.
11
A list of COM ports appears.
Specify the COM port of the DUSTHUNTER.
If you do not know the COM port:
see “Finding the DUSTHUNTER COM port”, page 81
.
12
Enter a name for this search if you want to save it.
13
Click “Finish“.