128
8024493/AE00/V1-0/2020-09| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100 Ex-2K
Subject to change without notice
18
ANNEX
18
Annex
18.1
Compliances
The technical design of this device complies with the following EU directives and EN
standards:
●
EU directive: 2014/30/EU (EMC)
●
EU directive: 2011/65/EU (RoHS)
●
EU directive: 2014/34/EU (ATEX)
Applied EN standards:
●
EN 60529, Degrees of protection provided by enclosures (IP code)
●
EN 61010-1 Safety requirements for electrical equipment
●
EN 61000-6-2 Electromagnetic compatibility
●
EN 61326, Electrical equipment for measurement, control and laboratory use - EMC
requirements
●
EN 50581, Guideline for the implementation of RoHS
●
EN 14181, Stationary source emissions - Quality assurance of automated measuring
systems
●
EN 60079-0:2012-08
●
EN 60079-15:2010-05
●
EN 60079-28:2015-09
●
EN 60079-31:2014-07
●
EN 60079-1:2018
●
EN 60079-7:2015
18.2
Electrical protection
●
MCUDH:
Protection class 1 according to EN 61010-1.
●
Insulation coordination: Overvoltage category II in accordance with EN61010-1.
●
Contamination: The device operates safely in an environment up to degree of
contamination 2 according to EN 61010-1 (usual, not conductive contamination and
temporary conductivity by occasional moisture condensation).
●
Electrical energy: The wiring system to the power supply voltage of the system must be
installed and fused according to the relevant regulations.
18.3
Approvals
Approvals
DUSTHUNTER SP100 Ex-2K is performance-tested according to EN 15267 and may be
used for continuous emission monitoring in systems requiring approval and systems
according to EU Directives.