Operating Instructions
Chapter
9
DME4000
8014584/ZN33/2017-07
© SICK AG • Germany • Subject to change without notice
117
Appendix
9.6
DeviceNet
9.6.1
General
The vendor ID of the DME4000-xx4 and DME4000-xx5 (DeviceNet) is 808.
The DeviceNet type (generic type) is 0.
The product code has 3 digits:
DME4000-
xx4
has the product code
4
DME4000-
xx5
has the product code
5
The basis is the DeviceNet specification 2.0, errata 5.
The product name is “DME4000”.
9.6.2
Configuration
Configuration and commissioning of the DME4000 as a Device Net Slave is shown using the Allen
Bradley Software RS Networx for DeviceNet (Revision 4.12):
Procedure:
DME4000-xx4
plug in and connect 8-pin M16 device plug
plug in and connect 5-pin M12 device plug
DME4000-xx5
plug in and connect 5-pin M12 device plug
Import ESD file from the disk supplied.
Click on Tools/EDS Wizard and follow the EDS Wizard’s instructions.
In the folder “...\DeviceNet\Vendor\SICKAG\GenericDevice” the DME4000 appears,
Hook up to the bus using the mouse pointer (see screen shot :)
Set the Slave address by double-clicking on the address (here: 06). (Compare with p. 11: 3.1.2 bus
address, the baud rate must also match.)
