Product type
DL1000 and DT1000
SSI, RS-422
Switchable
Function: measured data output
RS-422-Baudraten: 4.8 kbit/s; 9.6 kbit/s; 19.2 kbit/s; 38.4 kbit/s;
57.6 kbit/s; 115.2 kbit/s; 230.4 kbit/s
RS-422 data format: 8n1 (8 data bits, no parity, 1 stop bit), 8o1
(8 data bits, odd parity, 1 stop bit), 8e1 (8 data bits, even parity, 1
stop bit), 7n1 (7 data bits, no parity, 1 stop bit), 7o1 (7 data bits,
odd parity, 1 stop bit), 7e1 (7 data bits, even parity, 1 stop bit)
Output protocol: 8 bit ASCII-coded characters
SSI baud rates: 70 kHz ... 500 kHz bit pulse
PROFIBUS DP
Function: parameterization, measurement data output
Baud rates (automated recognition): 9.6 kbit/s; 19.2 kbit/s;
45.4 kbit/s; 93.75 kbit/s; 187.5 kbit/s; 500 kbit/s, 1.5 Mbit/s;
3 Mbit/s, 6 Mbit/s; 12 Mbit/s
Ethernet
Function: parameterization, measurement data output (TCP/IP)
11.3
Mechanics/electronics
Product type
DL1000 and DT1000
Supply voltage V
s
DC 18 V ... 30 V, reverse polarity protected, SELV or PELV
Residual ripple
≤ 5 V
ss
1
Power consumption P
v
With heater switched off (≤ 22 W)
2
With heater switched on (≤ 35 W)
2
Initialization time
Typ. 30 s
Housing material
Aluminum alloy
Glass
Polycarbonate
PA
Connection type
M12 round connector x 1
Display
Graphical, resistive touch display, status LEDs
Weight
1,000 g
Enclosure rating
IP 65, IP 67 (IEC 60529)
3
Protection class
III (EN 61140)
Electrical safety
EN 61010
1
May not fall short of or exceed U
V
tolerances
2
With external load
3
Plugged in with suitable mating connector
11.4
Ambient data
Product type
DL1000 and DT1000
Ambient temperature
Operation: –40 °C ... +55 °C
1
Storage: –40 °C ... +75 °C
Max. rel. air humidity (non-
condensing)
≤ 95%
Effect of air pressure
0.3 ppm/hPa
Effect of temperature
-1 ppm/K
Temperature drift
Typ. 0.25 mm/K
11
TECHNICAL DATA
114
O P E R A T I N G I N S T R U C T I O N S | DT1000 PROFIBUS DP and DL1000 PROFIBUS DP
8024560/1A19/2021-06-30 | SICK
Subject to change without notice
