8014753/ZVZ7/2018-03-22 • © SICK AG • Subject to change without notice 21
Operating instructions Distance measuring device DL100 Pro – RS-422
Transport and storage
5 Transport and storage
5.1
Transport
Improper transport
ATTENTION!
Damage to the distance measuring device by improper
transport!
Improper transport may cause considerable property
damage.
Therefore:
• Only have transport performed by trained workers.
• When unloading and during internal transport, always
proceed with the greatest care and caution.
• Observe icons on the packaging.
• Only remove packaging right before commencement of
installation.
5.2
Transport inspection
Improper transport
Inspect the delivery for completeness and transport damage without delay
upon receipt.
If there is any externally visible transport damage, proceed as follows:
• Do not accept the delivery, or only under reservation.
• Note the scope of the damage on the transport documents or the
delivery receipt of the transporter.
• Initiate complaints.
NOTE!
Report every defect as soon as you recognize it.
Damages claims can only be asserted within the
applicable complaint periods.
