$
2,5 Nm -
3 Nm
5 Nm -
6 Nm
b
Make sure that the active and passive units are aligned correctly. The optical lens
systems of the active and passive units must be opposite one another (
%
).
%
b
If necessary, use a spirit level to check that the components are parallel (
&
).
&
5.4.1
Mounting the QuickFix bracket
Overview
The active and passive units are each mounted using 2 QuickFix brackets.
The QuickFix bracket consists of 2 individual parts that are pushed into each other. The
two individual parts are connected using an M5 screw, and the housings of the active
and passive units are clamped with form-fit clamping.
5
MOUNTING
50
O P E R A T I N G I N S T R U C T I O N S | deTem4 LT Muting A/P
8024802/2020-07-17 | SICK
Subject to change without notice