SICK CLV640 Operating Instructions Manual Download Page 19

Page: 19 / 132

Operating Instructions

Chapter

CLV640 Bar Code Scanner

Quick-Start

8011975/0000/2008-04-14

Quick-Start

3.1

Preparing the bar code scanner for the quick start

The bar code scanner can be operated quickly and easily using the supplied SOPAS-ET con-
figuration software.

The software offers the following options, among others:

•

Fast connection with the bar code scanner

•

Configuration of the most important reading parameters and display of the reading re-
sults on

one

clear register tab in the configuration software

System requirements for using the SOPAS-ET configuration software

See

chapter 7.2.2 System requirements for the SOPAS-ET configuration software, page 65

Additional accessories required (not in delivery)

•

Connection module CDB620 or CDM420

•

For the Ethernet version of the bar code scanner: Connection cable for data and func-
tion interfaces (see

chapter 11.4.7 Accessories: Cables for Ethernet version,

page 115

)

•

3-wire RS-232 data cable (null modem cable no. 2014054)

- or -

To connect an Ethernet version of the bar code scanner to the PC's Ethernet interface:
relevant cable (see

chapter 11.4.7 Accessories: Cables for Ethernet version,

page 115

Perform an electrical connection to the bar code scanner

1. Connect the bar code scanner to connection module CDB620/CDM420.
2. Switch on the power supply for CDB620/CDM420.
3. Switch on the PC for the configuration and install and start the supplied SOPAS-ET con-

figuration software.

4. Connect the bar code scanner.

To achieve this, connect the PC using a 3-wire RS-232 data cable (null modem cable)
to the "Aux“ connection in CDB620/CDM420.

- or -

Connect the PC to the bar code scanner's Ethernet interface (Ethernet version).

For detailed instructions, see

chapter 5 Installation, page 41

and

chapter 6 Electrical in-

stallation, page 51

3.2

Establishing connection with the bar code scanner

Communicate with the bar code scanner according to the selected data interface (RS-
232 or Ethernet) (see

chapter 7.3 Establish communication with the bar code scanner,

page 66

) and perform a scan.

TIP

To establish a connection quickly and easily via Ethernet, the SOPAS-ET configuration soft-
ware has a C

ONNECTION

IZARD

in the T

OOLS

menu.

Summary of Contents for CLV640
































































































































Search results

Summary of Contents for CLV640

Reviews:

Related manuals for CLV640

Brands by name

Popular brands

SICK CLV640, Operating Instructions Manual

Search results

Summary of Contents for CLV640

Reviews:

Related manuals for CLV640

Brands by name

Popular brands