SICK CLV620 Operating Instructions Manual Download Page 58

Page: 58 / 106

Chapter

Operating Instructions

CLV62x Bar Code Scanner

8011965/S345/2008-04-16

Startup and configuration

7.2.3

Installing the SOPAS-ET configuration software

1. Start the PC and insert the installation CD.
2. If installation does not start automatically, call setup.exe on the CD.
3. Follow the operating instructions to conclude installation.

7.2.4

Default setting for SOPAS-ET configuration software

Tab. 7-1:

Default setting for the SOPAS-ET configuration software (excerpt)

7.3

Establish communication with the bar code scanner

Prerequisite

The TCP-IP protocol at the PC has to be active to enable communication via TCP-IP.

7.3.1

Connecting data interfaces

Connect the PC and bar code scanner to each other.

Tab. 7-2:

Connection between the PC with SOPAS-ET configuration software and the bar code
scanner

Parameter

Value

User interface language

English (the software has to be restarted after
changes)

Units of length

Metric

User group (operating level)

Maintenance

Download parameter for changes

Immediate, temporary (bar code scanner's RAM)

Upload parameter after online switching

Automatic

Window layout

3 (project tree, help, work area)

Serial communication

COM 1: 9,600 Bd/19,200 Bd, 8 data bits, 1 stop
bit, no parity 1)

Connection

Via data interface

Comment

Bar code scanner

STANDARD (RS-232) Directly connect the PC (serial interface) to the AUX or

HOST connection of the bar code scanner using a suit-
able cable (see

chapter 11.4.8 Accessories: General

cables and connectors, page 91

Bar code scanner
(optional)

ETHERNET (10/100
MBit/s)

Directly connect the PC (Ethernet interface) to the
ETHERNET connection of the bar code scanner (see

chapter 11.4.7 Accessories: Cables for Ethernet ver-
sion, page 90

Summary of Contents for CLV620








































































































Search results

Summary of Contents for CLV620

Reviews:

Related manuals for CLV620

Brands by name

Popular brands

SICK CLV620, Operating Instructions Manual

Search results

Summary of Contents for CLV620

Reviews:

Related manuals for CLV620

Brands by name

Popular brands