Operating Instructions
Chapter
4
CLV62x Bar Code Scanner
Product description
8011965/S345/2008-04-16
©
SICK AG · Division Auto Ident · Germany · All rights reserved
21
4
Product description
This chapter describes the design, the features and the functions of the CLV62x Bar Code
Scanner.
¾
For installation, electrical installation and startup assistance as well as for the applica-
tion-specific configuration of the bar code scanner using the SOPAS-ET configuration
software, please read this chapter
prior
to carrying out any of the tasks.
4.1
Setting up the bar code scanner
The CLV62x Bar Code Scanner consists of a laser scanner (laser diode and lens) with fixed
focus and an electronic unit with an integrated decoder. The laser scanner and electronic
unit are located in a housing. The ligh exits and enters via a reading window in the industrial-
type housing. The bar code scanner (depending on the version) is electrically connected by
a cable with a connector or a revolving connector unit with two connections.
For an adaptation to on-site space conditions, two housings are available: a housing with
front reading window and a housing with side reading window. Via the integrated angle at-
tachment, the laser beam exits through the side reading window at an angle of emergence
of 105°.
Depending on the type, various lenses enable different resolutions and reading areas.
4.1.1
Device view
Fig. 4-1:
Housing types of the CLV62x Bar Code Scanner
Standard version
Ethernet version
Reading window on front
Reading window on front
Reading window on side
Reading window on side
Bar code scanner with cable
and D-Sub connector
Bar code scanner with revolving connector unit
(M12 connectors)