CAUTION
Before triggering the preset function, check whether there is any danger from the
machine or system in which the encoder is integrated!
The preset function leads to a change of the position value output by the encoder.
This could cause an unexpected movement that could endanger people or damage the
system or other objects.
4.1.3
Speed measurement
Possible units are:
•
cps = counts per second
•
cp10 ms = counts per 10 ms
•
cp100 ms = counts per 100 ms
•
rpm = revolutions per minute
•
rps = revolutions per second
The factory setting is rpm.
NOTE
The unit of speed should be selected so that the maximum speed value occurring in the
application can be represented in the selected PGN. (TxPGN1 only 2 bytes for speed)
INTEGRATION IN A SAE J1939 NETWORK
4
8027379/2022-01-21 | SICK
O P E R A T I N G I N S T R U C T I O N S | AHS/AHM36 SAE J1939
AHS/AHM36 SAE J1939 Inox
13
Subject to change without notice
