7
OPERATION
56
8027513/V1-0/2022-03|SICK
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
Subject to change without notice
7.2.2
Automatic code reading
▸
Hold and maneuver object as needed so that the code can be read.
▸
Hold flat and small objects in the reading field at a small distance from the Lector6xx.
•
The red laser dots (or the red laser cross) visible on the object make it easier to align
the object for successful code reading.
Fig. 51: Automatic code reading
•
As a rule, the code is already read when the object is placed in the field of view. The left
image display contains the camera image of the Lector6xx with the codes, and the right
image continues to display the current measurement situation.
•
The red coloring of the object and hand visualizes that the prerequisites for weight and
dimension determination have not yet been met.
Successful code reading is visualized as follows:
•
The left image display with the codes is outlined in
.
•
The read code is also outlined in in the camera image.
•
The read code information is displayed above the camera image.
•
The green feedback LED lights up on the Lector6xx.
The Lector6xx is then deactivated again. The illumination and aiming laser are switched
off.
NOTE
If the mobile hand-held scanner is connected, the code can always be read with
it as an alternative to the Lector. After successful code reading, the Lector is deactivated
again. The read code appears in the display (see section
).
Display
