COMMISSIONING
6
43
8027513/V1-0/2022-03|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
6
Commissioning
Commissioning may only be performed by qualified persons.
•
Qualified persons have the specialist training, skills, experience and knowledge of
the relevant regulations and standards needed to be able to perform work assigned
to them and to identify and avoid any potential dangers independently.
•
Electricians have the professional training, skills, experience and knowledge of the
relevant standards and provisions needed to work on electrical systems and to detect
and avoid any potential dangers independently.
6.1
Switching on MDA Vision
All components of the MDA Vision are started together.
▸
Make sure that there is no object on the scale.
▸
Switch on MDA Vision.
•
All system components of the MDA Vision are booted up and checked for operational
readiness in a self-test.
•
The start-up process takes about 30 seconds (without separate camera).
•
During the start-up phase, a window with a progress display appears on the
touchscreen. This indicates the progress of the start-up phase.
•
After the initial switch-on, the installation wizard appears (see the following section
•
If initial commissioning has taken place, the measuring window is displayed after start-
up (see
7.1 Layout of the user interface
).
Start process
