7
Operation
7.1
Calling up user interface
Before opening the user interface, perform the following work steps
•
Connect the device to the PC via Ethernet.
•
Set up the voltage supply for the device.
•
Ensure that the PC and device are located in the same network.
•
Ensure that the PC uses a different IP address than the device.
Opening SOPASair user interface via a web browser:
1.
Open web browser window (recommendation: Google Chrome).
2.
Enter the device IP address into the address line. The standard IP address is:
192.168.0.1
✓
The SOPASair user interface is displayed.
7.2
Overview
1
2
3
4
5
1
Show/Hide menu bar buttons and open start menu; display of open menu
2
Device information display
3
Menu bar
4
User level button and display
5
Workspace
7.3
User levels
The device has different user levels.
The current user level is displayed in the lower area of the user interface.
1.
Click on the display of the current user level.
✓
The
Login
input mask opens.
2.
Select user level (
Username
), enter password (
Password
) and click on
LOGIN
.
User levels
Password
User/Authorizations
Run
-
Customers: Display only, no configu‐
ration
AuthorizedClient
client
Technical staff: Install and configure
device
OPERATION
7
8025963//2020-08-05 | SICK
O P E R A T I N G I N S T R U C T I O N S | TiM8xx DistanceGuard
27
Subject to change without notice
