Figure 52: Editing fields using coordinates
The reference points for the X and Y values are as follows:
•
Rectangle: top left corner
•
Circle: center point
•
Circle sector: center point
•
Polygon: each point individually
•
Contour line: each point individually
7.8.7
Drawing in points that cannot be monitored
The area to be monitored is scanned radially
1
. For this reason, shadows
3
are
formed by objects in the room
2
(support columns, separator grids, etc.). The safety
laser scanner cannot monitor these areas.
CONFIGURATION
7
8023152/1G5N/2022-06-28 | SICK
O P E R A T I N G I N S T R U C T I O N S | outdoorScan3 Core I/O
91
Subject to change without notice