manualshive.com logo in svg

SICK 1094452, Manual, Page: 63 / 156

Share
Download
SICK 1094452 Manual Download Page 63

5.3

Mounting procedure

The following options for mounting the safety laser scanner are available:

•

mounting directly without a mounting kit

•

mounting using mounting kit 1

•

mounting using mounting kits 1 and 2

•

Mounting with mounting kit 3 (suitable for weather hood)

The mounting kits 1 and 2 are built upon one another. This means that for mounting
using mounting kit 2, you also need mounting kit 1.

Each mounting kit consists of a bracket, and the screws needed to mount the safety
laser scanner on the bracket.

DANGER

Hazard due to lack of effectiveness of the protective device
Persons or parts of the body to be protected may not be recognized or not recognized in
time in case of non-observance.

b

You must take account of the minimum distances calculated for your machine, 

see

"Assembly", page 29

.

b

Mount the safety laser scanner so that crawling beneath, climbing over and stand‐
ing behind the protective fields is impossible.

Figure 36: Prevent crawling beneath

Figure 37: Prevent stepping over

NOTE

b

Read this section completely before mounting the safety laser scanner.

MOUNTING 

5

8023152/1G5N/2022-06-28 | SICK

O P E R A T I N G   I N S T R U C T I O N S | outdoorScan3 Core I/O

63

Subject to change without notice

Summary of Contents for 1094452





























































































































































Reviews:

No comments