Figure 15: Unsecured areas
1
Length of the unsecured area
2
Width of the unsecured area
Area where detection capability is restricted
In close proximity (50 mm wide area in front of the optics cover), the detection capabil‐
ity of the safety laser scanner may be restricted. If required, this area must be secured
using an undercut or frame, for example.
Mounting with deflector plates
Figure 16: Mounting with deflector plates (example)
b
Attach the deflector plates
1
so that it is not possible to step into unsecured
areas.
b
Attach the deflector plates so that they lie outside the scan plane.
4
PROJECT PLANNING
32
O P E R A T I N G I N S T R U C T I O N S | outdoorScan3 Core I/O
8023152/1G5N/2022-06-28 | SICK
Subject to change without notice