MOUNTING
4
49
8020776/12AX / 2019-05-31|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S |Free Flow Profiler
4
Mounting
4.1
Mounting 2D LiDAR sensors
4.1.1
General advice
Always mount the 2D LiDAR sensors in accordance with the specifications and technical
drawings to ensure that they can detect the vehicles correctly.
Observe the detailed drawings and information contained in the annex to these operating
instructions and in the operating instructions for the 2D LiDAR sensor.
WARNING
Risk of damage to devices during mounting
▸
Mount the 2D LiDAR sensors so that they are protected from dirt and damage.
▸
Ensure that the field of view of each 2D LiDAR sensor is not restricted.
▸
Make sure that the connectors can be plugged in and unplugged without any difficulty.
▸
Avoid exposing the 2D LiDAR sensors to excessive shock and vibration.
WARNING
Legal provisions
▸
When mounting the system components, please observe any national and local legal
stipulations and official instructions.
WARNING
Prevent the 2D LiDAR sensors from falling
▸
We recommend that you secure the components that have been mounted above the
lane so that they cannot fall down, e.g., by using a chain or rope.
