SICK 1086947 Operating Instructions Manual Download Page 136

Page: 136 / 239

GETTING STARTED

136

8024172/V3-0/2021-01|SICK

Oper at i ng i ns t r uc t i ons | LABEL CHECKER P6XX

Subject to change without prior notice.

4.12.2

How to save results

You can select from this feature of what type of image will be sent via the FTP.

Figure 87 How to save results

Saving images only when inspection fails is highly recommended due to the less

bandwidth usage than storing all images.

4.12.3

Draw results to image

The stored images will contain the draw inspection results.

4.12.4

Save results to file. csv file

The database is exported into a single csv file. The data fields are separated by a
predefined separator, most usually with a semicolon. The separators are required so that
the fields correspond from row to row. The CSV file is sent every 100

trigger, when a job

is changed or when a number of regions were changed.

Figure 88 CSV separator

If the fields of data in your CSV file contain commas, you can protect them by enclosing

those data fields in double-quotes ("). The commas that are part of your data will then be

kept separate from the commas which delimit the fields themselves.

If your fields contain double-quotes as part of their data, the internal quotation marks
need to be doubled so they can be interpreted correctly.

Summary of Contents for 1086947
















































































































































































































































Search results

Summary of Contents for 1086947

Reviews:

Brands by name

Popular brands

SICK 1086947, Operating Instructions Manual

Search results

Summary of Contents for 1086947

Reviews:

Brands by name

Popular brands