2
SAFETY
12
8024172/V3-0/2021-01|SICK
Oper at i ng i ns t r uc t i ons | LABEL CHECKER P6XX
Subject to change without prior notice.
2.3
Requirements for the qualification of personnel
Only qualified Service personnel may use the Label Checker to design, configure,
commission, and diagnose safety-related devices, device groups, or system
configurations.
Project planning
For project planning, a person is considered competent when he/she has expertise and
experience in the selection and use of protective devices on machines and is familiar with
the relevant technical rules and national work safety regulations.
Parameterization
For parameterization, a person is considered competent when he/she has the expertise
and experience in the relevant field and is sufficiently familiar with the application of the
protective device on the machine that he/she can assess its work safety aspects.
Commissioning
For commissioning, a person is considered competent when he/she has the expertise and
experience in the relevant field and is sufficiently familiar with the application of the
protective device on the machine that he/she can assess its operational safety status.
Operation and maintenance
For operation and maintenance, a person is considered competent when he/she has the
expertise and experience in the relevant field and is sufficiently familiar with the
application of the protective device on the machine and has been instructed by the
machine operator in its operation.
