User’s Manual 7
This mode allows showing and modifying all the programming parameters.
Scroll menus by means up and down arrows to select an entry and press ENTER to confirm
selection. Select then the variable or another menu. At the end of menu tree, there are variable
lists: variable in lists are shown by dedicate page for each variable.
Variable value is shown delimited in square brackets, such as:
[400]
To modify the variable, press ENTER, brackets begin to flash.
Use the vertical scrolling pushbuttons (up and down arrows) to modify the value, press ENTER
to confirm or EXIT to abort.
To go back the previous menu, press the EXIT pushbutton.
This mode shows, by means of some different pages, information about the genset operation
and status.
It is possible to scroll between different pages using horizontal scroll pushbuttons (left and
right arrows).
Alarm page is automatically recalled in case of a new alarm event.
Fuel pump page is automatically recalled pressing SHIFT and EXIT pushbuttons together (fuel
pump status toggle).
This mode shows, by means some different pages selectable by horizontal scroll pushbuttons
(left and right arrows), all the measures that the board carries out.
It allows recalling to the display events and data records.
