Quick start guide
DATOSPIR
touch
www
.sibelmed.com
www
.sibelmed.com
511-B00-GR2 Re
v. 0
SIBEL S.A.
Rosselló 500 Bajos, 08026 Barcelona
National sales: Tel. 93 436 00 08 · e-mail: [email protected]
International sales: Tel. +34 93 436 00 07 · e-mail: [email protected]
After-sales Service: Tel. +34 93 433 54 50 · e-mail: [email protected]
Fax: +34 93 436 16 11
www.sibelmed.com
Class IIa product according to 93/42/CEE Medical Device Directive
SIBEL S.A.
is a member of
www.sibelgroup.com
Congratulations, you have acquired a
SIBELMED
spirometer, a leading brand in the
industry.
Please read the
USER MANUAL
in order to maximize its using.
The
DATOSPIR
touch
spirometer is a compact device based in different types of
transducers: Fleisch, Turbine or disposable Lilly, a wide color touch screen, a built-in
temperature sensor and a thermal printer. An internal database is used to store the
tests and an external printer can be connected via USB or Bluetooth.
SETUP
When placing the spirometer make sure that the following conditions are meet:
- Mains connection: 100 to 240V AC.
- Operating temperature: 5 to 40º C
- Relative humidity: < 85 % (without condensation).
- Pressure: 850 to 1060 hPa. (638 to 795 mmHg / 1500 to 0 m aprox.)
- Keep away from splashing water or other liquids.
Note:
Read the user’s manual for a safe use of the device.
Use mouthpieces certified acording to Directive 93/42/EEC to
ensure the patient safety and the quality of spirometry.
CALIBRATION
(C)
Making a calibration:
1.
Press
in the main menu.
2.
Press
in the setup menu.
3.
Press
in the calibration menu.
Repeat points 2 and 3 of the previous section
(B).
5.
Press
to save the calibration.
4.
Once the calibration cycles are completed, the device
should display the “CALIBRATED !!!” message.
The difference in this mode is that the device not only checks the calibration,
but also stores the new calibration factors.
0197