Package
Overview
Installation
2
3
4
►
Connecting
Network
Cable
2
1
3
*
1 It
is
recommended
to
install
the
water
-
proof
cap
for
network
cable connection
.
*
2
If
the PoE network
switch
is
used
to
connect
the
camera that supports PoE
power supply
,
DC12V
power supply
is
not
required
.
①
Loosen
the
nut
from
the
main
element.
②
Run
the
network
cable (without
RJ 45
connector) through the
both elements. Then
crimp
the
cable
with
RJ 45
connector
.
③
Connect
the
cable
to
the
hermetic
connector
.
Then
tighten
the
nut
and
the
main
cover
.
Thank you for purchasing Sibell. We are always looking to
improve and will update the products or procedures as technology
changes and the industry adapts. If you need further product
assistance please contact your technical support specialist.
Content is subject to change without notice.*
Quick
Start
Guide
Network
Camera
Camera
Quick
start
guide
CD
Water
-
proof
cap
Plastic
plug
×4
Drill
template
Rubber plug
Screwdriver
4 tapping screws PA 4×35
Network Cable
MIC IN Cable
CVBS Cable
Power
Cable
1
2
3
4
Please make sure that the wall or ceiling is strong enough to
withstand 3 times the weight of the camera. Please install and use the
camera in the dry environment.
Advised: If lens cover is removed, re apply cover within 4 hours
①
Drill the screw holes and the cable hole on the wall according to
the
drill template.
∅
4.3
∅
107.5
∅
100.0
8.9mm
R6.3
90°
70.7mm
70.7mm
②
Loosen the screws to remove the lower dome from the camera.
Lower
Dome
Netwo
rk Cab
le
1
2
3
4
DC12V
1
Warning
and
Caution
■ If the product does not work properly, please contact your dealer or th
e
nearest service center. Never attempt to disassemble the camera yourself.
(We shall not be responsible for any problems caused by unauthorized
repair or maintenance.)
■ Keep away from liquid while in use due to risks of electric shock
■ When using this product, you must be strict compliance with electrica
safety regulations to reduce the risk of electric shock. When the product
is mounted on the wall or ceiling, the device should be secured firmly.
■ Do not use camera beyond specified voltage rang
■ Do not drop the camera or damage the camera physicall
■ Avoid touching the camera len
■ If cleaning is necessary, please use clean cloth to wipe the lens gently
If the device will not be in use for a long period of time, please cover the
lens with lens cap to protect the device.
■ Do not aim the camera at the sun or extra bright illuminatio
■ Do not place the camera in dusty, damp or extremely hot, or col
situations/locations (the operating temperature is
(
-4˚F~122˚F/-20˚C~50˚C
), and do not expose it to high
electromagnetism or radiation.
■ To avoid heat accumulation, good ventilation is required for operatin
environment.
■ Regular Maintenance is recommended for all users
To Use Water-proof Cap:
you must have experience in cable termination