Si-tex T-760 Series, Instruction Manual

Page: 127 / 252

Chapter 5 VARIOUS FUNCTION ICONS
93
5.15 VECTOR LENGTH
Sets TT and AIS vectors. The bearing and speed signal input are required to display TT and AIS vectors.
In the True vector mode, the direction of a target vector indicates the true course of the target and its vector
length is proportional to its speed. In this mode, the movements of other ships around own ship can be
accurately and easily monitored.
The relative vector does not represent the true motion of the target, but its relative relation with own ship. This
means that a target with its relative vector directed to own ship will be a dangerous target.
The vector length of a target is proportional to its speed, and the vector time can be switched in a range of 1
to 60 minutes.
①
Tap icon.
②
Tap
“
Vector Length
”
bar .
③
Tap each key for change
Vector Length.
④
Select Vector Mode
⑤
Rotate Rotary knob and
change Vector Length
or Swipe on the screen