Si-tex T-760 Series, Instruction Manual

Page: 107 / 252

Chapter 5 VARIOUS FUNCTION ICONS
73
5.7 TT OPERATIONS
To use this function, GPS signal and GYRO signal are necessary.
The TT function calculates the course and speed of a target by automatically tracking the targets movement.
The alarm will sound in a dangerous case.
Tap a target which you want to track.
Then a TT symbol mark will be appeared around the target.
Tracked target is numbered automatically.
When the number of targets tracked has reached to the
maximum (10 targets), any new target is not acquired.
Tracking target
This symbol is displayed for the target which becomes the tracking
target after acquired.
This is displayed with a circle of thick line (basic color is white).
When selecting a tracking target to display its numeric information,
this symbol is superimpose-displayed on the selected target.
This is displayed with a split square (basic color is white).
This is superimpose-displayed on tracking targets, new tracking
targets or dangerous targets.