Si-tex T-760 Series, Instruction Manual

Page: 100 / 252

Chapter 5 VARIOUS FUNCTION ICONS
66
5.3 CURSOR FUNCTION
The cursor elimination method
Using the cursor function can read out a selected target information.
Tap the cursor icon. Tap anywhere on the screen, the cursor mark is
displayed in place where it has been tapped. At the same time, the range and
bearing information at that point are displayed in the lower side of the screen.
If the GPS signal coming in, the latitude and longitude information of that point
are also can be displayed.
Tap anywhere on the screen
“BEARING”
BRG 20.0°
“RANGE”
RNG 0.3464NM
“TTG”
TTG +2.1MIN
In case of GPS signal coming in
“Latitude “ LAT 35° 04.2292’
N
“Longitude”
LON 136° 46.3008
’
E
Do not touch the screen for about 10 seconds,
the information bar will be fade out.
The cursor icon is eliminable by carrying out a
double tap.