Si-tex SP38, Installation And Operation Manual, Page: 83 / 193

Sitex SP38 Installation and Operation Getting Started
Document PN 29010101 V1r0
- 83 -
 Alarm – contains all alarm messages on the screen that have been
acknowledged (May not show if there are no alarm messages)
 System Menu – defines the format and layout for Heading, speed, provides
system and SPU info etc.
 Network Config – allows user to connect any devices (such as Heading and
Navigation source) on N2K network to the SP38 SPU. In order for the SP38
system to work, the SP38 Control Head gets configured to the SP38 SPU
through the N2K before any use. On the other side, the SP38 Control Head can
be used as the Heading Display without SPU, if configured to a valid Heading
Source through this selection.
 Factory – allows user for Factory Testing & Upgrading units.
Main Menu Flowchart
System, Network Config. and Setup Flowchart (Setup devices for N2K network)
Factory