16
Specifications
Laboratory hotplate SLK 12
Status 01 May 2012
CE code:
EMC - Compatibility Directive 2004/108/EC by the Council, Low Voltage Directive
in accordance with Directive 2006/95/EC by the Council
Country of origin:
Germany
Display:
1 indicator light for the control display - Display, Ø 6 mm,
front left next to the energy regulator on the front of the unit.
1 indicator light for the residual heat display - Display, Ø 6 mm,
left, on the top of the glass ceramic
Power connection:
Power cable with grounded plug, 230 Volt.
Power cable with U.S. plug, 115 Volts.
Protective measure:
Unit of protection class I, built and tested according to protective measures for
electrical equipment, not for use in hazardous explosive environments.
Power supply:
Power supply system: 230 V~, 50 / 60 Hz
Power supply system: 115 V~, 50 / 60 Hz
Housing material:
Stainless steel frame, steel floor plate
Climate:
Ambient temperature: + 10 ... + 40 °C for the operation and storage
Humidity:
according to EN 61 010, part 1:
maximum relative humidity 80 % for temperatures up to 31 °C,
linear declining up to 50 % of relative humidity at a temperature of 40 °C
The laboratory hotplates by SI Analytics at a glance:
Specifications
SLK 12, 230 Volt SLK 12, 115 Volt
Dimensions
approx. W x H x D [mm]
330 x 73 x 300
330 x 73 x 300
Floor area, glass ceram-
ic
approx. W x D [mm]
330 x 300
330 x 300
Heating surface of glass
ceramic
approx. [mm]
∅
110,
∅
180
∅
180
Heater type
Infra-red
Infra-red
Heater capacity [W]
700, 1700
1 600
Weight, approx. [kg]
4.5
4.5
The laboratory hotplate
SLK 12
with its radiant heater is suitable for quickly heating liquids. The maximum
heating stage <<
9
>> in the 230 Volt unit at a connected heating circuit 1 corresponds with a heating ca-
pacity of 0.7 kW or a heating capacity of 1.7 kW at an additionally connected heating circuit 2.
The maximum heating stage <<
9
>> in the 115 Volt unit corresponds with a heating capacity of 1.6 kW.
A thermal protection prevents the laboratory hotplate from overheating.