5. If you connect the Shuttle Mini-PC Complete System to a connector strip, please
ensure that the required amperage of all of the products connected does not ex-
ceed the capacity of the connector strip.
6. You should always disconnect your Shuttle Mini-PC Complete System and the
connected appliances from the power and from one another before cleaning.
7. Your Shuttle Mini-PC Complete System must never come into contact with water or
other liquids.
Assembly and Startup
Only place your Shuttle Mini-PC Complete System on surfaces which are stable,
firm, non-slip and even. Do not cover, obstruct or block any of the Shuttle Mini-PC
Complete System‘s openings. These are to prevent overheating. After the suitable
place has been found, you can unp ack your Shuttle Mini-PC Complete System and
the accessories. Please be very careful when unpacking as all of the components are
sensitive to shock. If you do not take care the hard drive can be damaged very easily.
Therefore prevent any shocks to and any unnecessary transporting of the
Shuttle Mini-PC Complete System.
If you do have to open the casing (e.g. when upgrading your system), please adhere
to the following:
1. Disconnect the Shuttle Mini-PC Complete System from the power network and also
remove all connections to connected appliances.
2. Always ensure that the casing is closed firmly and that all of the screws have been
screwed tight before you re-connect the Shuttle Mini-PC Complete System or other
connected appliances to the power network.
Please take a moment to inspect the outside of your Shuttle Mini-PC Complete System.
This also includes components such as the monitor, speakers and other peripherals.
If you notice any external defects such as scratches or dents, please contact the dealer
from whom you bought your Shuttle device. Before you start to connect the peripherals
such as the monitor, speakers or joystick, we recommend that you connect a high-
voltage protection device or a UPS (uninterruptible power supply) to the power cable.
Ensure that no long cables are used and that the nearest power source is used.
EN
3
