- 32 -
Clear CMOS (J11)
J11 is used to clear CMOS data. Clearing CMOS will result in the permanent
erasing of previous system configuration settings and the restoration of original
(factory-default) system settings.
Pin 1-2 (Default)
Pin 2-3 (Clear CMOS)
Step 1.
Turn off the system power (PC-> Off).
Step 2.
Remove jumper cap from J11 pins 1-2.
Step 3.
Place the jumper cap on J11 pin 2-3 for a few seconds.
Step 4.
Return the jumper cap to pin 1-2.
Step 5.
Turn on the system power (PC-> On).
1
1
A3
1
J11
Clear CMOS
