- 34 -
Audio Connector Line Out (JP11)
This header is used to connect the cable
attached to Line-Out which are mounted
on front-panel. This header share the same
signal with Line-Out on back-panel.
Pins Assignment:
1=LOUT->TDA1308
2=LOUT->JP10.4
3=AGND
4=ROUT->JP10.2
5=ROUT->TDA1308
Audio Connector Line/MIC-In (JP4)
This header is used to connect the cable
attached to Line-In and Mic-In phone jacks
which are mounted on front-panel. This
header share the same signal with Line-In/
Mic-In on back-panel.
Pins Assignment:
1=Right In 2=Left In
3=AGND 4=Voltage 5=MIC In
Audio Connector CD-In (JP6)
Port JP6 is used to attach an audio con-
nector cable from the CD-ROM drive.
Pins Assignment:
1=CD-IN-L 2=CD-GND
3=CD-GND 4=CD-IN-R
1 2 3 4 5
1 2 3 4 5
1 2 3 4
E3
E4
E5
Note:
Please remove two mini jumpers from JP11 which inserted on JP11 pin1-2
and pin4-5, when you want to used the front-panel audio (Line-Out) in
addition. You need to plug your front-panel audio cable to this connector.
JP11
1
JP4
1
JP6
1
