- 34 -
HDD LED Connector (HDLED)
Attach the connector cable from the IDE device LED to the 2-pin HDLED header.
The HDD LED lights up whenever an IDE device is active.
PWR LED Connector (PWR LED)
Attach the 3-pin Power-LED connector cable from the housing front-panel to
the PWR LED header on the mainboard. The power LED stays light while the
system is running.
Hardware Reset Connector (RST)
Attach the 2-pin hardware reset switch cable to the RST header. Pressing the
reset switch causes the system to restart.
C4
C5
C6
JP10
1 RST
PWR LED
+ -
SPEAK
GLED
+ -
+ -
EPMI PWON
JP10
1 RST
PWR LED
+ -
SPEAK
GLED
+ -
+ -
EPMI PWON
JP10
1 RST
PWR LED
+ -
SPEAK
GLED
+ -
+ -
EPMI PWON
