- 33 -
HDD LED Connector (HLED)
Attach the connector cable from the IDE device LED to the 2-pin HLED header.
The HDD LED lights up whenever an IDE device is active.
PWR LED Connector (PLED)
Attach the 3-pin Power-LED connector cable from the housing front-panel to
the PLED header on the mainboard. The power LED stays light while the sys-
tem is running.
Hardware Reset Connector (RST)
Attach the 2-pin hardware reset switch cable to the RST header. Pressing the
reset switch causes the system to restart.
C4
C5
C6
RST HLED
PLED
+ -
+ - + -
SPEAKER
GLED EPMI PWR ON
1
JP11
RST HLED
PLED
+ -
+ - + -
SPEAKER
GLED EPMI PWR ON
1
JP11
RST HLED
PLED
+ -
+ - + -
SPEAKER
GLED EPMI PWR ON
1
JP11
