- 34 -
C1
C2
F
Front-Panel Connectors
ATX Power On/Off Switch Connector (PWON)
The Power On/Off Switch is a momentary type switch used for turning on or off
the system ATX power supply. Attach the connector cable from the Power
Switch to the 2-pin (PWON) header on the mainboard.
EPMI Connector (EPMI)
Hardware System Management Interface (EPMI) header may attach to 2-pin
momentary switch. Press the switch to force system into power saving mode;
press it again to resume back the normal operation situation.
Note :
Please notice all the LED connectors are directional. If your chassiss
LED does not light up during running, please simply change to the
opposite direction.
JP1 4
G LED/PL ED
1
H LED
+
-
-
+
+
+
-
-
EPMI
R ST
SPEAKER
PW ON
PLED
KEYLOC K
JP1 4
G LED/PL ED
1
H LED
+
-
-
+
+
+
-
-
EPMI
R ST
SPEAKER
PW ON
PLED
KEYLOC K
