- 39 -
3.3 System Memory Configuration
The FV24 mainboard has two 168-pin DIMM slots that allow you to install
from 16MB up to 1GB of system memory.
Each 168-pin DIMM (Dual In-line Memory Module) Slot can accommodate
16MB, 32MB, 64MB, 128MB, 256MB, and 512MB of PC100/PC133
compliant 3.3V single or double side 64-bit wide data path SDRAM modules.
Install Memory:
Install memory in any or all of the slots and in any combination shown as
follows.
Note:
You do not need to set any jumper to configure memory since the
BIOS utility can detect the system memory automatically. You can
check the total system memory value in the BIOS Standard CMOS
Setup menu.
Upgrade Memory:
You can easily upgrade the system memory by inserting additional SDRAM
modules in available DIMM slots. The total system memory is calculated by
simply adding up the memory in all DIMM slots. After upgrade, the new
system memory value will automatically be computed and displayed in the
field " Standard CMOS Setup" of BIOS setup program.
DIMM Slot
Memory Modules
Module
Quantity
DIMM 1
16MB, 32MB, 64MB, 128MB, 256M
B, and
512MB 168-pin 3.3V SDR SDRAM DIMM
x 1
DIMM 2
16MB, 32MB, 64MB, 128MB, 256M
B, and
512MB 168-pin 3.3V SDR SDRAM DIMM
x 1
