- 6 -
2.2 Windows NT4.0
6
Install driver under Windows NT4.0
1. Click
Start
-->
Setup
-->
Control Panel
, then double-click
SCSI
Adapter
icon.
2. In the follow-on window, select
Driver
item. then click
Add
button.
3. In the follow-on window, select
Have Disk....
4. Insert the CD disk of driver, input the path of driver
D:\RAID\WinNT
,
then click
OK
.
5. In the follow-on window, select
HPT372 UDMA/ATA133 RAID
Controller
item, then click
OK
.
6. Follow the system prompt to install the driver. When finished, restart
the computer.
6
Install driver in the process of Windows NT4.0 installation
1. Press
F6
key when the system prompts Setup is inspecting
your
computers hardware configuration.
2. Press
F6
key, the installation will continue. Later, installation pro-
gram will remind user to press
S
key to specify other devices. Please
press
S
key.
3. In the follow-on
Device Type
window, select
Other
item, then
press
Enter
to confirm.
4. The installation program will prompt users to insert the CD disk
of driver. Please insert it and then press
Enter
to confirm.
5. In the follow-on window, select
HPT372 UDMA/ATA133 RAID
Controller
, then press
Enter
to confirm.
6. The follow-on interface will list the devices to be installed, in which
HPT372 UDMA/ATA133 RAID Controller
item should be included.(
If users want to install other devices,please operate at this time. If all
devices have been successfully installed, please go to next.)
7. Press
Enter
to continue the installation of Windows NT4.0.
6
Verify Installation
When the driver has been successfully installed and the computer restarted:
1. Click
Start
-->
Setup
-->
Control Panel
, and then double-click
SCSI
Adapter
item.
