- 15 -
3.3 Create Stripe Array
The following steps shall be taken to create the stripe array.
1. Click
Stripe
icon on the tool bar.
2. Select the strip size in the follow-on window, and then click
Next
button.
3. In the follow-on dialog box, select hard disk from
Available Disks
column. Add them into
Stripe Array Member Disks
column by
clicking the corresponding arrow button. Then click
Next
button.
4. In the follow-on dialog box, click
Create
button to create stripe array,
or click
Cancel
button to cancel this creation. If the cancel operation
has been selected, the system will remain unchanged.
5. After the completion of creating stripe array , shut down all other
programs. Then click
Yes
to restart the computer, or select
No
to
restart the computer later .
Note:
1. At least two hard disks are needed to create the stripe array.Disks can
be connected at any cable and setted as either master or slave device.
2. The capacity of the stripe array is eaqual to the product of the number
of total hard disks and the smallest HD capacity.
