Shuttle 48 plus Manual Download Page 1

FCC Notice:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC

Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used properly.  In strict

accordance with the manufacturer’s instructions, may cause harmful interference to radio communications.  However,

there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to

try to corrrect the interference by one or more of the following measures :

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the qeuipment into an outlet on a circiut different from that to which the receiver is connected.

Consult the dealer or an experienced radio/television technician

for help and for additional suggestions.

The user may find the following booklet prepared by the Federal Communications Commission helpful  “How to Identify

and Resolve Radio-TV Interference Problems.”  This booklet is available from the U.S. Government Printing Office. Wash-

ington, DC 20402, Stock o. 004-000-00345-4

FCC Warning

The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user’s

authority to perate this equipment.

Note :  In order for an installation of this product to maintain compliance with the limits for a Class B device, shielded

cables and power cord must be used.

N O T I C E

Copyright 1995.

All right reserved

Manual Ver 1.2

All information, documentation, and specifications contained in this manual are subject to change without prior notification by

the manufacturer.

The author assumes no responsibility for any errors or ommissions which may appear in this document nor does it make a

commitment to update the information contained herein.

T R A D E M A R K S

Ad-Lib is a registered trademark of Ad-Lib Inc.

IBM PC/AT, PS/2 are registered trademarks of International Business Machines Corp.

Mitsumi is a registered trademark of Mitsumi Corp.

MPU-401 is a registered trademark of Roland Corp.

MS-DOS, Windows 3.1 and Windows Sound System are registered trademarks of  Microsoft Corp.

OPTi is a registered trademark of OPTi Inc.

Panasonic is a registered trademark of Panasonic Corp.

Sound Blaster, Sound Blaster Pro are registered trademarks of Creative Labs, Inc.

Sony is a registered trademark of Sony Corp.

GEM is a trademark of Digital Research, Inc,

Macintosh is a trademark of Apple Computer.

Yamaha OPL3 and OPL4 are registered trademarks of Yamaha Corp.

All other product names are for indentification only and are trademarks of their respective companies.

Summary of Contents for 48 plus














Reviews: