![background image](http://html1.mh-extra.com/html/shure/ulxd6-8/ulxd6-8_manual_1262748021.webp)
Shure Incorporated
21/23
1.
2.
Housing
Molded Plastic
Audio Input
Microphone Connector
6-pin connector for Shure MX405/10/15
Configuration
Unbalanced
Impedance
>20 kΩ
RF Output
Antenna Type
Integrated PIFA
Impedance
50 Ω
Occupied Bandwidth
<200 kHz
Audio Frequency Response
50 Hzto17 kHz (varies with capsule)
Modulation Type
Shure proprietary digital
Power
1 mW, 10 mW, 20 mW
See Frequency Range and Output Power table, varies by region
Important Product Information
LICENSING INFORMATION
Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for
possible requirements. Changes or modifications not expressly approved by Shure Incorporated could void your authority to
operate the equipment. Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability de
pends on the user’s classification and application, and on the selected frequency. Shure strongly urges the user to contact the
appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies.
Certifications
Information to the user
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.